Search Results
53 Products for "avr"
Filter

- Description
- Very powerful SDS Max (TE-Y) rotary hammer for heavy-duty concrete drilling and chiseling, with Active Vibration Reduction (AVR)
- Weight according to EPTA-Procedure 01/2003 without battery
- 8.3 kg
- Single impact energy
- 11.5 J
- Hammer drilling diameter range
- 12 - 150 mm




- Description
- Powerful SDS Plus (TE-C) rotary hammer for heavy-duty concrete drilling and corrective chiseling, with Active Vibration Reduction (AVR)
- Weight according to EPTA-Procedure 01/2003 without battery
- 4.2 kg
- Optimum Hammer drilling range
- 10 - 20 mm
- Single impact energy
- 3.6 J




- Description
- Very powerful TE-S demolition hammer for heavy-duty chiseling in concrete, with Active Vibration Reduction (AVR)
- Working direction
- Wall, Floor
- Tool chuck type
- TE-S
- Weight according to EPTA-Procedure 01/2003 without battery
- 10.6 kg




- Description
- Versatile and powerful SDS Max (TE-Y) rotary hammer for concrete drilling and chiselling, with Active Vibration Reduction (AVR) and Active Torque Control (ATC)
- Weight according to EPTA-Procedure 01/2003 without battery
- 7.8 kg
- Single impact energy
- 7.8 J
- Hammer drilling diameter range
- 12 - 100 mm





- Description
- Very powerful SDS Max (TE-Y) rotary hammer for heavy-duty concrete drilling and chiseling, with Active Torque Control (ATC) and Active Vibration Reduction (AVR)
- Weight according to EPTA-Procedure 01/2003 without battery
- 9.5 kg
- Single impact energy
- 11.5 J
- Hammer drilling diameter range
- 12 - 55 mm





- Description
- Powerful SDS Max (TE-Y) demolition hammer for heavy-duty chiseling in concrete and masonry, with Active Vibration Reduction (AVR)
- Working direction
- Wall
- Tool chuck type
- TE-Y (SDS Max)
- Weight according to EPTA-Procedure 01/2003 without battery
- 7.9 kg




- Description
- Versatile SDS Max (TE-Y) demolition hammer for light-duty chiseling in concrete and masonry, with Active Vibration Reduction (AVR)
- Working direction
- Wall
- Tool chuck type
- TE-Y (SDS Max)
- Weight according to EPTA-Procedure 01/2003 without battery
- 6.3 kg




- Description
- Versatile TE-S breaker for demolishing concrete floors and occasional wall chiseling
- Working direction
- Floor, Wall
- Tool chuck type
- TE-S
- Weight according to EPTA-Procedure 01/2003 without battery
- 12.5 kg




- Description
- Powerful and extremely light TE-S breaker for concrete and demolition work
- Working direction
- Floor
- Tool chuck type
- TE-S
- Weight according to EPTA-Procedure 01/2003 without battery
- 14.5 kg




- Description
- Versatile breaker for demolishing or chiseling floors and occasional wall applications (with universal power cord)
- Working direction
- Floor, Wall
- Tool chuck type
- TE-S
- Weight according to EPTA-Procedure 01/2003 without battery
- 12.5 kg




- Description
- Our most compact SDS Max (TE-Y) rotary hammer for lightweight comfort and control while drilling or chiseling in concrete, stone, and masonry
- Weight according to EPTA-Procedure 01/2003 without battery
- 6.1 kg
- Single impact energy
- 6 J
- Hammer drilling diameter range
- 12 - 82 mm




- Description
- Very powerful SDS Max (TE-Y) rotary hammer for heavy-duty drilling and chiseling in concrete
- Weight according to EPTA-Procedure 01/2003 without battery
- 10 kg
- Single impact energy
- 14.5 J
- Hammer drilling diameter range
- 12 - 150 mm




- Description
- Exceptionally powerful breaker for heavy-duty concrete demolition, asphalt cutting, earthwork and driving ground rods
- Working direction
- Floor
- Tool chuck type
- TE-H (Hilti HEX 28)
- Weight according to EPTA-Procedure 01/2003 without battery
- 27.1 kg


- Description
- Detachable supply cord for the TE 1000-AVR concrete demolition hammer
- Product information
- Detachable supply cord for the TE 1000-AVR
- Length
- 5000 mm


- Description
- Detachable supply cord for the TE 3000-AVR concrete demolition hammer
- Product information
- Detachable supply cord for the TE 3000-AVR
- Length
- 5000 mm

- Description
- Exceptionally powerful electric jackhammer for heavy-duty floor demolition (with universal power cord)
- Working direction
- Floor
- Tool chuck type
- HEX 28
- Weight according to EPTA-Procedure 01/2003 without battery
- 29.9 kg
![[TEC:Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).][TET:Products in this group use a Hilti TE-T type connection end (commonly called SDS-Top).][TEY:Products in this group use a Hilti TE-Y type connection end (commonly called SDS-Max).][TES:Products in this group use a Hilti TE-S type connection end.][HEX:Products in this group use a HEX 28 type connection end.]](https://productdata.hilti.com/APQ_HC_f300/H28_V1_PDP.jpg)



- Description
- Exceptionally powerful Hex 28 electric jackhammer for heavy-duty concrete floor demolition
- Working direction
- Floor
- Tool chuck type
- HEX 28
- Weight according to EPTA-Procedure 01/2003 without battery
- 29.9 kg
![[TEC:Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).][TET:Products in this group use a Hilti TE-T type connection end (commonly called SDS-Top).][TEY:Products in this group use a Hilti TE-Y type connection end (commonly called SDS-Max).][TES:Products in this group use a Hilti TE-S type connection end.][HEX:Products in this group use a HEX 28 type connection end.]](https://productdata.hilti.com/APQ_HC_f300/H28_V1_PDP.jpg)



- Description
- Tool case for breakers
- Product information
- Tool case to use with TE 300-AVR
- Length
- 497 mm

Nuron
- Description
- Powerful cordless multitool with a StarlockMax interface, AVR and an oscillating angle of 4°
- Base material
- Drywall, Wood, Mortar, Paint, Wood with nails, Softwood (fir, pine etc.), Cement, Metal, PVC, Timber
- No load RPM
- gear 1: 20000 rpm
- Triaxial vibration value for cutting board (ah,B)
- 2.5 m/s²

- Description
- Needle adapter for the TE 300-AVR for removing paint and rust from rebar
No technical data available


- Description
- Dust removal system for concrete demolition with the TE 3000-AVR electric jackhammer
- For use with
- TE 3000-AVR
- Need vacuum cleaner
- Yes
- Suitable for drilling
- No

- Description
- Injectable mortar accessories for blowing out (Air nozzle)
No technical data available

- Description
- Agile and light air cleaner for removing fine airborne particles during construction work
- Weight
- 15.2 kg
- Dimensions (LxWxH)
- 492 x 419 x 674 mm
- IP protection class
- IP 44 (EN 60529)

- Description
- Galvanized air duct bracket for fastening ventilation ducts directly to ceilings
- Approvals
- Acoustic insulation DIN 4109 inspected
- Noise reduction
- 16 dB (A)
- Material composition
- DD11 - DIN EN 10111, EPDM

- Description
- Galvanized air duct clamp for use with regular ducts
- Tightening torque
- 5 Nm
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanized

- Description
- Pre-formed fire cavity barrier for rainscreen cladding with 60 minutes of fire integrity and air gaps up to 50mm
- Length
- 1200 mm
- Height
- 80 mm
- Density
- 80 kg/m³


- Description
- Pre-formed fire cavity barrier for rainscreen cladding with 60 minutes of fire integrity and air gaps up to 25 mm
- Length
- 1200 mm
- Height
- 80 mm
- Density
- 80 kg/m³


- Description
- Galvanized air duct bracket for fastening or hanging ventilation ducts
- Approvals
- Acustic insulaton DIN 4109 inspected
- Noise reduction
- 12 dB (A)
- Material composition
- DD11 steel - DIN EN 10111, EPDM

- Description
- Ultimate-performance injection mortar - fast-cure adhesive anchor approved for structural base plate anchoring and post-installed rebar connections in concrete
- PROFIS Software
- Yes
- Clean-Tec
- No
- Storage and transportation temperature range
- 5 - 25 °C




- Description
- Galvanized air duct bracket for fastening light ventilation ducts overhead
- Approvals
- Acoustic insulation DIN 4109 inspected
- Noise reduction
- 18 dB (A)
- Material composition
- DD11 steel - DIN EN 10111, EPDM

- Description
- Galvanized air duct bracket for fastening medium ventilation ducts overhead
- Noise reduction
- 12 dB (A)
- Material composition
- DD11 steel - DIN EN 10111, EPDM
- Surface finish
- Indoor Coated - Electro galvanized

- Description
- Ultimate-performance shallow undercut anchor (stainless steel, external thread)
- Material, corrosion
- Stainless steel, A4
- Head configuration
- Externally threaded
- Approvals / Test reports
- ETA, Fire





- Description
- All-season polyurethane foam ideal for air-sealing and filling in a wide temperature range
- Foam Yield (up to)
- 50 l
- Approx. tack free time (at 23°C / 50% rel. humidity)
- 12 min
- Approx. cut time (at 23°C / 50% rel. Humidity)
- 25 min

- Description
- Galvanized air duct hangers for fastening round air ducts with sound insulation
- Approvals
- Acoustic insulation DIN 4109 inspected
- Noise reduction
- 18 dB (A)
- Material composition
- DD11 steel - DIN EN 10111, EPDM

- Description
- Accessory for DCH electric hand-held diamond cutters
- Accessory type
- Chucks

- Description
- Accessories for metal grinding and finishing tools
- Accessory type
- Other
- Product information
- For pumping up rubber air rollers.

- Description
- Low-pressure foam for air-sealing, filling and insulating doors and windows without warping the frames or jambs
- Foam Yield (up to)
- 36 l
- Approx. tack free time (at 23°C / 50% rel. humidity)
- 10 min
- Approx. cut time (at 23°C / 50% rel. Humidity)
- 15 min

- Description
- Replacement hoses for use with Hilti air cleaners
- Accessory type
- Hoses
- Length
- 7500 mm
- Width
- 200 mm

- Description
- Replacement hoses for use with Hilti air cleaners
- Accessory type
- Hoses
- Length
- 7500 mm
- Width
- 250 mm

- Description
- Replacement hoses for use with Hilti air cleaners
- Accessory type
- Wall connectors

- Description
- Robust load distribution plate for installing air conditioning units, walkways, ventilation ducts, pipework, or cable trays on flat roofs
- Material composition
- Plate: Diecast aluminium, Rubber plate: EPDM, Connector: S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)

- Description
- Stainless steel (A4) pipe ring saddle adapter for converting the diameter of threaded rods
- Required material grade
- A4
- Material composition
- Stainless steel, 1.4401 (A4) - EN 10088, AISI 316
- Surface finish
- Outdoor Plus - Stainless Steel

- Description
- SDS plus (TE-C) setting tool for installation and fastening pipes, air ducts and suspended ceilings
No technical data available


- Description
- SDS plus (TE-C) setting tool for installation and fastening pipes, air ducts and suspended ceilings
No technical data available


- Description
- SDS plus (TE-C) setting tool for installation and fastening pipes, air ducts and suspended ceilings
No technical data available


- Description
- SDS plus (TE-C) setting tool for installation and fastening pipes, air ducts and suspended ceilings
No technical data available


- Description
- Filler modules for sealing unused space within transit frames when high water- and gas-tightness and fire-resistance are required
- Temperature resistance range
- -40 - 50 °C

- Description
- Modules to seal cables/pipes within a transit frame when high water- and gas-tightness and fire-resistance are required
- Approvals
- UL
- Temperature resistance range
- -40 - 50 °C
- Reaction to fire class (EN 13501-1)
- E

- Description
- Filler modules for sealing unused space within transit frames when high water- and gas-tightness and fire-resistance are required
- Approvals
- UL
- Temperature resistance range
- -40 - 50 °C
- Reaction to fire class (EN 13501-1)
- E

- Description
- Modules to seal cables/pipes within a transit frame when high water- and gas-tightness and fire-resistance are required
- Temperature resistance range
- -40 - 50 °C

- Description
- Filler module with electromagnetic compatibility for sealing unused space within transit frames when high water- and gas-tightness and fire-resistance are required
- Temperature resistance range
- -40 - 50 °C
- Reaction to fire class (EN 13501-1)
- E

- Description
- Ultimate core bit for coring in very abrasive concrete – for use with the DD EC-1 and DD 30-W (incl. Hilti C+ quick-release connection end)
- For use with
- DD 30-W
- For use with (global)
- DD 30-W
- Base materials
- Concrete (abrasive)
