Search Results
94
Products for "has"
Filter
- Description
- Threaded rod (metre) for injectable hybrid/epoxy anchoring in concrete and masonry (5.8 or 8.8 carbon steel and HDG or A4 stainless steel)
- Material, corrosion
- Carbon steel 5.8, Carbon steel 5.8 HDG, Carbon steel 8.8, Carbon Steel, Hot-Dip Galvanized, Stainless steel, A4
- PROFIS Software
- Yes
- Application
- Baseplate
- Description
- Pre-cut threaded anchor rod for injectable hybrid/epoxy anchoring in concrete and masonry (5.8 or 8.8 carbon steel and HDG or A4 stainless steel)
- Material, corrosion
- Carbon steel 5.8, Carbon steel 5.8 HDG, Carbon steel 8.8, Carbon Steel, Hot-Dip Galvanized, Stainless steel, A4
- PROFIS Software
- Yes
- Application
- Baseplate
- Description
- High-performance anchor rod for capsule and injectable hybrid/epoxy anchoring in concrete and masonry (5.8 or 8.8 carbon steel and HDG or A4 stainless steel)
- Material, corrosion
- Carbon steel 5.8, Carbon steel 5.8 HDG, Carbon steel 8.8, Carbon Steel, Hot-Dip Galvanized, Stainless steel, A4
- PROFIS Software
- Yes
- Application
- Baseplate
- Description
- High-performance dynamic anchor rod for through and presetting using injectable hybrid anchors (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Environmental conditions
- Dry indoor
- Base materials
- Concrete (cracked), Concrete (non-cracked)
- Description
- Economical hook/ring anchor for suspended fastenings in concrete
- Head configuration
- Closed eyebolt, Open eyebolt
- Environmental conditions
- Indoor, dry conditions
- Material, corrosion
- Carbon steel, zinc-plated
- Description
- Ultimate-performance anchor rod for adhesive capsules (high corrosion resistance)
- Material, corrosion
- Stainless steel, HCR (High-Corrosion Resistance)
- Environmental conditions
- Highly corrosive special applications (e.g. tunnels, swimming pools), Underwater, salty water
- Base materials
- Concrete (cracked), Concrete (non-cracked)
- Description
- High-performance anchor rod for injectable hybrid/epoxy anchors (carbon steel, ASTM F1554 grade 36, zinc-plated)
- Material, corrosion
- Carbon steel, zinc-plated
- Environmental conditions
- Dry indoor
- Base materials
- Concrete (cracked), Concrete (non-cracked), Masonry (hollow), Masonry (solid)
- Description
- High-performance anchor rod for adhesive capsules (8.8 carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Environmental conditions
- Dry indoor
- Base materials
- Concrete (cracked), Concrete (non-cracked), Masonry (hollow), Masonry (solid)
- Description
- High-performance anchor rod for adhesive capsules and injectable hybrid/epoxy anchors (316 stainless steel)
- Material, corrosion
- Stainless Steel, 316
- Environmental conditions
- Costal areas / Roads with de-icing salt, Outdoor (more than 1km to coast), Outdoor (more than 1km to coast), Outdoor with heavy industrial pollution
- Base materials
- Concrete (cracked), Concrete (non-cracked), Masonry (hollow), Masonry (solid)
- Description
- Eye protection for general use
- Additional Accessory Information
- Lens: PC material, thickness 2.2 mm, Supravision HC-AF coating, filter 2-1.2, impact energy 120m/s, surface resistance to fine particles: K, antifog: N
- Description
- Subcompact-class 12V brushless hammer drill driver for when you need access, low weight and high control
- Maximum torque (Soft / Hard Joint)
- 21 Nm (soft joint), 34 Nm (hard joint)
- No load RPM
- gear 1: 400 rpm; gear 2: 1600 rpm
- Chuck clamping range
- 1 - 10 mm
- Description
- Tester for proof loading and determination of pullout resistance of anchors and DX fasteners
No technical data available
- Description
- Cast-in anchor channels in standard sizes and lengths with the regulatory approvals needed for virtually any challenging project
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanized
- Channel profile
- HAC-50, HAC-60
- PROFIS Software
- Yes
- Description
- Serrated cast-in anchor channels in standard sizes and lengths with the approvals needed for 3D loads
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanized
- PROFIS Software
- Yes
- Description
- Black steel C profiles for steel-to-steel welding applications
- Material, corrosion
- Carbon steel
- PROFIS Software
- No
- Description
- High performance hot-rolled cast-in anchor channels in standard sizes and lengths suitable for a wide range of applications
- Material, corrosion
- Stainless steel, A4, Carbon Steel, Hot-Dip Galvanized
- Channel profile
- HAC-C-P 40/22, HAC-C-P 50/30
- PROFIS Software
- Yes
Nuron
- Description
- Power-class hammer drill driver with Active Torque Control and advanced ergonomics for universal drilling and driving on wood, metal and masonry (Nuron battery platform)
- Maximum torque (Soft / Hard Joint)
- 65 Nm (soft joint), 85 Nm (hard joint)
- No load RPM
- gear 1: 490 rpm; gear 2: 2000 rpm
- Chuck clamping range
- 2 - 13 mm
- Description
- Basic hand-drive tool for threaded studs
- Application
- [consumable dependent]
- Fastener Intake
- Single
- Weight
- 0.13 kg
- Description
- Economical sleeve anchor for use on all solid base materials
- Head configuration
- Inner thread
- Environmental conditions
- Indoor, dry conditions
- Approvals / Test reports
- N/A
- Description
- Economical sleeve anchor with screw and washer
- Head configuration
- Hex head
- Environmental conditions
- Indoor, dry conditions
- Approvals / Test reports
- N/A
- Description
- Post-installed hoist point for temporary suspensions during installation and maintenance in elevator shafts
- Material, corrosion
- Cast-iron, Multilayer coating
- Head configuration
- N/A
- Base materials
- Concrete (cracked), Concrete (uncracked)
- Description
- Hanger for concealed fastening of façade cladding using self-tapping screws
- Height
- 63.5 mm
- Length
- 50 mm
- Material composition
- Aluminum EN AW-6063 T66
- Description
- Torque-controlled socket wrench for setting HSA anchors
- Connection end
- 1/2 in square
- Description
- Plunge cut blade attachments for the oscillating multitool, available in HCS, BiM and carbide blades for plunge cuts in wood, hardwood or metal
No technical data available
- Description
- High carbon steel (HCS) scraper blade attachment for the oscillating multitool, for scraping paint or glue
No technical data available
- Description
- Extra-sharp asphalt cutter chisels for faster, more precise breaking up of asphalt or hard-packed gravel using the third-gen TE 3000 or H28 demolition tools with clamp
- Connection end
- TE-H (Hilti HEX 28)
- Application
- Asphalt cutting
- Product Class
- Premium
- Description
- Setting tool – required for installation of HDA undercut anchors
No technical data available
- Description
- Setting tool – required for installation of HDA undercut anchors
No technical data available
- Description
- Disassembly tool – for easy removal of HDA undercut anchors
No technical data available
- Description
- T-bolts for use with HAC-C(-P) channels
- Channel profile
- HAC-C 28/15, HAC-C 38/17, HAC-C 52/34, HAC-C 54/33
- PROFIS Software
- Yes
- Description
- Stop drill bit – required for installation of HDA undercut anchors
- Connection end
- TE-C (SDS Plus)
- Working mode
- Drilling, Hammer drilling
- Base material
- Concrete
- Description
- Stop drill bit – required for installation of HDA undercut anchors
- Connection end
- TE-Y (SDS Max)
- Working mode
- Hammer drilling, Drilling
- Base material
- Concrete
- Description
- Post-installed hoist point for temporary suspensions during installation and maintenance in elevator shafts (1.15 tons working load)
- Material, corrosion
- Cast-iron
- Head configuration
- N/A
- Description
- Economical anchor rod for injectable hybrid/epoxy anchors (A4 stainless steel)
- Material, corrosion
- Stainless steel, A4
- Environmental conditions
- Costal areas / Roads with de-icing salt, Outdoor (more than 1km to coast), Outdoor (more than 1km to coast), Outdoor with heavy industrial pollution
- Base materials
- Concrete (cracked), Concrete (non-cracked), Masonry (hollow), Masonry (solid)
- Description
- Concrete maturity sensors for monitoring temperature and strength using Bluetooth® on-site data collection
- Monitoring
- Strength and temperature
- Data collection
- Bluetooth
- Data collection frequency
- Strength and temperature: every 15 minutes for the first 60 days
- Description
- Setting tool for capsule anchor rods with Conical heads
No technical data available
- Description
- Accessories for wall saw remote controls, such as extension cords and harness belts
No technical data available
- Description
- Accessories for wall saw remote controls, such as extension cords and harness belts
No technical data available
- Description
- Galvanized pipe clamp saddle for connecting threaded components to MQ/HS channels
- Product Class
- Premium
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanized
- Description
- Premium floor saw blade (5-18 HP) for floor sawing machines – designed for cutting concrete
- Tool type
- Floor saw
- Base material
- Concrete (non-reinforced), Concrete (reinforced), Concrete (heavily reinforced)
- Arbor size
- 25.4 mm
- Description
- Premium floor saw blade (20-35 HP) for floor sawing machines – designed for cutting concrete
- Tool type
- Floor saw
- Base material
- Concrete (non-reinforced), Concrete (reinforced), Concrete (heavily reinforced)
- Arbor size
- 25.4 mm
- Description
- Premium floor saw blade (5-18 HP) for floor sawing machines – designed for cutting asphalt
- Tool type
- Floor saw
- Base material
- Asphalt
- Arbor size
- 25.4 mm
- Description
- Premium floor saw blade (20-35 HP) for floor sawing machines – designed for cutting asphalt
- Tool type
- Floor saw
- Base material
- Asphalt
- Arbor size
- 25.4 mm
- Description
- Galvanized 90-degree angle bracket for connecting multiple MQ strut channels with high horizontal load capacity
- Material composition
- S275JR - EN 10025
- Surface finish
- Indoor Coated - Electro galvanized
- Material thickness
- 4 mm
- Description
- Torx drive screw for light-duty fastenings (carbon steel, countersunk head)
- Head configuration
- Countersunk Torx
- Material, corrosion
- Carbon steel, zinc-plated
- Description
- Galvanized beam clamp for connecting the open side or back of MQ/HS channels directly to steel beams
- Wrench size
- 17 mm
- Tightening torque
- 20 Nm
- Material composition
- S355 MC - DIN EN 10149-2, Screw: strength class 8.8, Plastic: PA 6.6
- Description
- S-HP02SS Self-tapping screw for hidden-panel fastenings in light-ventilated facade applications
- Screw drive/recess type
- TX 25 HF
- Length (input)
- 9 mm
- Base materials
- High pressure Laminate
- Description
- One-hole hinged connector for assembling seismic bracing of MT strut channel framing
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat T channel connector for fastening two MT channels together
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat cross channel connector for fastening three MT channels together
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat channel connector used as a longitudinal extender for MT channels
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Power tool harnesses for the EXO-T-22 tool balancer provide a universal fit for various tool shape housings during heavy wall demolition and drilling
- Weight
- 0.34 kg
- Description
- Power tool harnesses for the EXO-T-22 tool balancer provide a universal fit for various tool shape housings during heavy wall demolition and drilling
- Weight
- 0.35 kg
- Description
- Flat T channel connector for fastening two MT channels together, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Flat cross channel connector for fastening three MT channels together, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Flat channel connector used as a longitudinal extender for MT channels, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Ultimate-performance screw anchor for quicker permanent fastening in concrete (carbon steel, hex head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Hex head
- Approvals / Test reports
- ETA, Fire, VDS
- Description
- Premium-performance screw anchor for quicker permanent and temporary fastening in concrete (carbon steel, hex head)
- Material, corrosion
- Carbon steel, zinc-plated
- Head configuration
- Hex head
- Approvals / Test reports
- ETA
- Description
- One-hole hinged connector with pre-assembled Fast-Lock nut and bolt for assembling seismic bracing of MT strut channel framing
- Material composition
- Q355B, Bolt: grade 8.8, Nut: grade 8
- Material and coating
- Carbon steel - indoor coated
- Material thickness
- 5 mm, 6 mm
- Description
- Economical plastic impact anchor with carbon steel screw
- Head configuration
- Flat head
- Approvals / Test reports
- N/A
- Material, corrosion
- Carbon steel, zinc-plated