System connectors and interfaces
Profile connectors and interfaces – baseplates, angle brackets, beam clamps, saddles, and system nuts and bolts for connecting profiles and media in modular supports
290 Products
Filter
- Description
- Hot-dip galvanized (HDG) single beam clamp for connecting MT base connectors to steel beams
- Material composition
- Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Connector for attaching modular girders to structural steel beams
- Material composition
- Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized (HDG) baseplate for fastening MI-90 girders to concrete using two anchors
- Material composition
- Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized (HDG) connector fixed to the MI girder to accommodate pipe expansion in heavy-duty applications
- Material composition
- Body: S235JRG-2 - DIN EN 10025; Role: E295 (St50); Axle: stainless steel 1.4541; Bearing: PTFE
- Surface finish
- Hot-dip galvanized
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized (HDG) connector for fastening MQ strut channels perpendicular to MI girders
- Material composition
- Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 40 µm - DIN EN ISO 10684
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized (HDG) connector for fastening pipe shoes to MI girders for heavy-duty applications with expansion
- Material composition
- U-bolt: Steel grade 8.8; Plate: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Nut: Steel grade 8
- Surface finish
- HDG: U-bolt, Nut 45 µm - DIN EN ISO 1461; Plate: 55 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications
- Material composition
- Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt 48 µm - DIN EN ISO 10684; Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized (HDG) single beam clamp for connecting MT base connectors to steel beams
- Material composition
- Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized (HDG) connector for fastening MQ strut channels parallel to MI girders
- Material composition
- Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8
- Surface finish
- HDG: Connector 55 µm - DIN EN ISO 1461; Bolt 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized (HDG) connectors for flexible installation of horizontal divider beams in elevator shafts
- Surface finish
- HDG: 55 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized (HDG) connector used to connect MI girders longitudinally for long spans in heavy-duty applications
- Material composition
- Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized (HDG) connector used with MI baseplates that allow for free positioning of the girder
- Material composition
- DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2
- Surface finish
- None (primer coating-basic connector)
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized (HDG) multi-angle connector used with MIC-MAH connectors for fastening MI girders to one another at an angle
- Material composition
- Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Tooth plate: S235 - EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Connector 55 µm - DIN EN ISO 1461; Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized (HDG) screw with an integrated toothed plate for easier fastening and one-handed adjustment of MI and MIQ connectors
- Material composition
- Bolt: Steel grade 8.8; Tooth plate: S235 - EN 10025-2
- Surface finish
- HDG: 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors
- Material composition
- S235 - EN 10025-2
- Surface finish
- HDG: 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized (HDG) connector offering highest load capacity within the MI and MIQ modular system
- Material composition
- S235JR - DIN EN 10025-2
- Surface finish
- HDG: 55 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Premium galvanized base plate for light-duty fixed point applications (metric)
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanized medium-duty baseplate to fasten metric threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanized strut channel connector for use in braced MQ channel trapezes for seismic applications
- Material composition
- S275JR - EN 10025
- Surface finish
- Indoor Coated - Electro galvanized
- Material thickness
- 4 mm
- Description
- Galvanized medium-duty baseplate to fasten imperial threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanized angles to increase stiffness while supporting pipe rings in riser shafts
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanized
- Base material type
- Modular Support
- Description
- Premium galvanized 2-hole base plate for light-duty fixed point applications (imperial)
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Stainless steel (A4) medium-duty base plate to fasten imperial threaded rods with two anchor points
- Material composition
- Stainless steel, 1.4571/1.4404 (A4) - EN 10088, AISI 316Ti / AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Heavy-duty adjustable baseplate for connecting an MT girder horizontally between two parallel walls
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Material thickness
- base 8 mm
- Description
- Hot-dip galvanized (HDG) medium-duty base plate to fasten imperial threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanized beam clamp for fastening threaded rods to steel girders without internal thread
- Base material type
- Steel
- Material composition
- EN-GJMB - EN 1562
- Surface finish
- Indoor Coated - Electro galvanized
- Description
- Galvanized beam clamp for fastening threaded rods to steel girders with internal thread
- Base material type
- Steel
- Material composition
- EN-GJMB - EN 1562
- Surface finish
- Indoor Coated - Electro galvanized
- Description
- Galvanized retaining strap for fastening MAB beam clamps more securely
- Approvals
- VDS approved G4004005, VDS approved G4032026
- Base material type
- Steel
- Material composition
- Steel
- Description
- Base connector for anchoring MT-60D double strut channel to concrete in outdoor, low pollution environments
- Material composition
- Q355B
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- baseplate 8 mm, Angle: 4mm
- Description
- T-head bolt for fastening connectors and other construction elements to MIQ girders
- Material composition
- Bolt: grade 8.8 - DIN EN ISO 898, Plastic: PBT
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Premium galvanized 2-hole base plate for light-duty fixed point applications (metric)
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- MIQM Wing nut, connecting element for MIQ profiles
- Material composition
- Nut: C4C - DIN EN 10263, Plastic: PA 6.6
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Stainless steel (A4) medium-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- Stainless steel, 1.4571/1.4404 (A4) - EN 10088, AISI 316Ti / AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Stainless steel (A4) light-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- Stainless steel, 1.4571/1.4404 (A4) - EN 10088, AISI 316Ti / AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Premium stainless steel baseplate for light-duty fixed point applications (metric)
- Material composition
- Stainless steel, 1.4571/1.4404 (A4) - EN 10088, AISI 316Ti / AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Premium hot-dip galvanized (HDG) baseplate for light-duty fixed point applications (metric)
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Premium hot-dip galvanized (HDG) 2-hole base plate for light-duty fixed point applications (metric)
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Premium hot-dip galvanized (HDG) 2-hole base plate for light-duty fixed point applications (imperial)
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Premium stainless steel baseplate for light-duty fixed point applications (imperial)
- Material composition
- Stainless steel, 1.4571/1.4404 (A4) - EN 10088, AISI 316Ti / AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Galvanized light-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Standard hot-dip galvanized (HDG) connector for fastening MI girders to one another
- Material composition
- Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Backing plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Connector 55 µm - DIN EN ISO 1461; Backing plate, Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Channel end cap for covering the ends of Hilti MM strut channels
- Material composition
- Polypropylene (PP)
- Surface finish
- n/a
- Description
- Channel end cap for covering the ends of Hilti MQ strut channels
- Material composition
- Plastic component: Polypropylene
- Surface finish
- n/a
- Material thickness
- 4 mm
- Description
- Channel end cap for MT-30 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-40 and MT-50 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-70 girders
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-80 girders
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-90 girders
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-100 girders
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Girder end cap for safer and neater covering of MI and MIQ girder ends
- Material composition
- Moplen EP 240H