System connectors and interfaces
Profile connectors and interfaces – baseplates, angle brackets, beam clamps, saddles, and system nuts and bolts for connecting profiles and media in modular supports
290 Products
Filter
- Description
- Nut for attaching media to MT strut channels, for outdoor use with low pollution
- Material composition
- High Strength Steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- One-hole hinged connector for assembling seismic bracing of MT strut channel framing
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Weldable starter bracket for fastening MT girders to steel, coated with zinc (ethyl) silicate primer
- Material composition
- Q355 or better steel
- Surface finish
- Zinc ethyl silicate coated
- Description
- 45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Base connector for fixation of MT-90 and MT-100 girder structures to steel, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Slotted angle plate for attaching media to MT girders, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Braced angle bracket for heavy-duty MT girder structures subject to 3D loads, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Adjustable, braced angle bracket for girder and strut channel structures subject to 3D loading, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Clamp for channel-to-channel or channel-to-girder cross-connections with MT strut channel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Clamp for cross-connection of one MT girder to another channel/girder, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Clamp for cross-connection of one MT strut channel to concrete
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat T channel connector for fastening two MT channels together
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat cross channel connector for fastening three MT channels together
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat T channel connector for fastening two MT strut channels together
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat channel connector used as a longitudinal extender for MT channels
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat T channel connector for fastening two MT channels together, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Flat cross channel connector for fastening three MT channels together, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Flat T channel connector for fastening two MT strut channels together, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Flat channel connector used as a longitudinal extender for MT channels, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Medium load distribution plate for installing ventilation ducts and ventilation equipment on flat roofs
- Material composition
- Aluminium, EPDM rubber, Recycled Rubber blend SBR-PU-EPDM
- Surface finish
- n/a
- Material thickness
- 2.75 mm
- Description
- Angle connector for assembling strut channels structure or channel with Load Distribution Plate, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- 3D connector for assembling rigid strut channel structures for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Plate end cap for longitudinal suspension of MT-70 girders using threaded rod
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Angle brace for modular support structures with longer spans
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Strut channel connector for bracing modular support structures with longer spans
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Angle brace with corrosion-resistant coating for modular support structures with longer spans, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Strut channel connector with corrosion-resistant coating for bracing modular support structures with longer spans, for outdoor use with low pollution
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring strut channel structures under 3D loading to concrete or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Hot-dip galvanized connector plate for cantilever connections with MT-80 MT-100 girders in moderately corrosive environments
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanized girder connector for assembling and bracing modular support structures in moderately corrosive environments
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanized girder connector for assembling and bracing modular support structures in moderately corrosive environments
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Grade 8.8 bolt with square washer used for assembling raised floor systems in dry, indoor environments
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Grade 8.8 bolt with hot-dip galvanized square washer used for assembling raised floor systems in moderately corrosive environments
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hanger for suspending MT-70 and MT-80 girders from threaded rod to create heavy-duty MEP and HVAC trapeze
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hanger for suspending MT-90 and MT-100 girders from threaded rod to create heavy-duty MEP and HVAC trapeze
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanized girder connector for assembling and bracing modular support structures in moderately corrosive environments
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Base connector for anchoring strut channel structures under 3D loading to concrete and steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring MT-70 and MT-80 girder structures to concrete and steel, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring 3D, heavy-duty MT-90 girder structures to concrete, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring 3D, heavy-duty MT-100 girder structures to concrete, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Adjustable sliding bracket for fastening MP-PS pipe shoes to Hilti MT modular girders
- Material composition
- S280GD+ZM300
- Surface finish
- Outdoor Coated - ZM
- Material thickness
- 5 mm
- Description
- Outdoor coated (OC) bracket for fastening MP-PS pipe shoes to Hilti MT modular girders as fixpoint in mildly corrosive environments
- Material composition
- S280GD+ZM300
- Surface finish
- Outdoor Coated - ZM
- Material thickness
- 5 mm
- Description
- Adjustable guiding bracket for fastening MP-PS pipe shoes to Hilti MT modular girders
- Material composition
- S280GD+ZM300
- Surface finish
- Outdoor Coated - ZM
- Material thickness
- 5 mm
- Description
- Modular plate for mounting modular structures on structural steel without the need for direct fastening
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 12 mm
- Description
- Base connector for fixation of MT-90 and MT-100 girder structures to steel, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for fixation of MT-90 and MT-100 girder structures to steel, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanized base connector for fastening MT-70 and MT-80 girders to structural steel in moderately corrosive environments
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 6 mm
- Description
- Hot-dip galvanized adjustable heavy-duty bracing and baseplate suitable for girders, concrete and steel
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 10 mm
- Description
- Galvanized and Hot dip Galvanized adjustable connectors to control raised floor level at any stage of the installation process
- Surface finish
- Indoor Coated - Electro galvanized
- Description
- Threaded pipe clamp connector for fixing pipe clamps directly to MT girders
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3)
- Description
- Base connector for anchoring 3D, heavy-duty MT-90 girder structures to concrete in outdoor environments with low to moderate pollution (C3)
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 3 mm
- Description
- Galvanized pre-assembled threaded rod brace connector with increased load capacity for mounting to base material
- Material composition
- Connector: S275JR - DIN EN 10025, Pin: 11SMnPb37+C
- Surface finish
- Indoor Coated - Electro galvanized
- Material thickness
- 4 mm
- Description
- Heavy-duty adjustable baseplate for connecting an MT girder horizontally between two parallel walls
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- baseplate 8 mm
- Description
- Heavy-duty angled baseplate for bracing, long span supports or inclined surfaces, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 10 mm
- Description
- Base connector for anchoring MT-60D double strut channel to concrete
- Material composition
- Q355B
- Surface finish
- Indoor Coated - Electro galvanized
- Material thickness
- baseplate 8 mm, Angle: 4mm
- Description
- Galvanized wing nut for connecting modular support system components
- Material composition
- Wings: Plastic PA, Nut: S355MC - DIN EN 10149-2
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
standard
- Description
- Standard galvanized T-head bolt for connecting pipe clamps to MQ strut channels
- Product Class
- Standard
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanized
- Description
- Galvanized pipe clamp saddle – fire-tested according to ETA
- Approvals
- ETA
- Product Class
- Premium
- Material composition
- Nut: C4C - DIN EN 10263, Plate: S 235 JRG2 - DIN EN 10025, Plastic: PBT
ultimate
- Description
- Galvanized 90-degree angle bracket for connecting multiple MQ strut channels with high horizontal load capacity
- Material composition
- S275JR - EN 10025
- Surface finish
- Indoor Coated - Electro galvanized
- Material thickness
- 4 mm
premium
- Description
- Galvanized 90-degree pre-assembled angle for connecting multiple MQ strut channels
- Wrench size
- 17 mm
- Material composition
- Angle: DD11 - DIN EN 10111, Bolt: M10 grade 8.8 - DIN ISO 898
- Surface finish
- Indoor Coated - Electro galvanized