Standard fixings for support systems
Standard fixation elements for modular support systems – clips, couplers, clamps, threaded rods, air duct fasteners, bolts, nuts, screws and more
71 Products
Filter
- Description
- Galvanized pre-cut lengths of threaded rod with 4.6 steel grade
- Material composition
- Steel grade 4.6
- Surface finish
- Indoor Coated - Electro galvanized
- Load range
- Light duty
- Description
- Galvanized threaded rod with 4.8 steel grade
- Fire resistance ( Yes/No)
- No
- Material composition
- Steel grade 4.8 - DIN 976-1
- Surface finish
- Indoor Coated - Electro galvanized
- Description
- Hot-dip galvanized (HDG) threaded rod with 4.8 steel grade
- Material composition
- Steel grade 4.8
- Surface finish
- Hot-dip galvanized
- Base material type
- n/a
- Description
- Stainless steel (A4) pre-cut lengths of threaded rod
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4-70 - DIN EN ISO 3506-1
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanized threaded pipe with 4.6 steel grade used as an accessory for various applications
- Material composition
- Steel grade 4.6
- Surface finish
- Indoor Coated - Electro galvanized
- Base material type
- n/a
- Description
- Hot-dip galvanized (HDG) threaded pipe with 4.6 steel grade used as an accessory for various applications
- Material composition
- Steel grade 4.6
- Surface finish
- Outdoor Coated - HDG
- Insulation
- Without
- Description
- Stainless steel (A4) threaded pipes used as an accessory for various applications
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4-70 - DIN EN ISO 3506-1
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanized flat washer corresponding to ISO 7089
- Material composition
- Steel - DIN EN ISO 7089
- Surface finish
- Indoor Coated - Electro galvanized
- Load range
- Light duty
- Description
- Galvanized flat washer similar to ISO 7089
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanized
- Load range
- Light duty
- Description
- Hot-dip galvanized (HDG) flat washer corresponding to ISO 7089
- Material composition
- Steel - DIN EN ISO 7089
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light duty
- Description
- Stainless steel (A2) flat washer corresponding to ISO 7089
- Required material grade
- A2
- Material composition
- Stainless steel A2 – DIN EN ISO 7089
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel (A4) flat washer corresponding to ISO 7089
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4 – DIN EN ISO 7089
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel (A4) flat washer similar to ISO 7089 used in various applications
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanized flat washer corresponding to ISO 7093 used in various applications
- Material composition
- Steel - DIN EN ISO 7093-1
- Surface finish
- Indoor Coated - Electro galvanized
- Load range
- Light duty
- Description
- Hot-dip galvanized (HDG) flat washer corresponding to ISO 7093 used in various applications
- Material composition
- Steel - DIN EN ISO 7093-1
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light duty
- Description
- Stainless steel (A4) flat washer corresponding to ISO 7093 used in various applications
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4 - DIN EN ISO 7093-1
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanized grade 8 hexagon nut corresponding to DIN 934
- Material composition
- Steel grade 8
- Surface finish
- Indoor Coated - Electro galvanized
- Load range
- Medium duty
- Description
- Hot-dip galvanized (HDG) grade 8 hexagon nut corresponding to DIN 934
- Material composition
- Steel grade 8
- Surface finish
- Outdoor Coated - HDG
- Base material type
- n/a
- Description
- Stainless steel (A2) hexagon nut corresponding to DIN 934
- Required material grade
- A2
- Material composition
- Stainless steel A2-70
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel (A4) hexagon nut corresponding to DIN 934
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4-70
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanized hex nut with flange corresponding to DIN 6923 8
- Material composition
- Steel grade 8
- Surface finish
- Indoor Coated - Electro galvanized
- Load range
- Light duty
- Description
- Hot-dip galvanized (HDG) hexagon nut with self-locking mechanism used with all MI connectors
- Material composition
- Steel grade 8
- Surface finish
- HDG: 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Standard galvanized threaded plate for connecting threaded elements to MQ strut channels
- Product Class
- Standard
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanized
- Description
- Galvanized round coupling nut for extending threaded rods
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanized
- Load range
- Light duty
- Description
- Hot-dip galvanized (HDG) coupling nut for extending threaded rods
- Material composition
- Steel grade 4.6
- Surface finish
- Outdoor Coated - HDG
- Base material type
- n/a
- Description
- Stainless steel (A4) coupling nut for extending threaded rods
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4-70
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanized hexagonal coupling nut for extending threaded rods
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanized
- Load range
- Light duty
- Description
- Galvanized hexagon screw corresponding to DIN 933
- Material composition
- Steel grade 8.8
- Surface finish
- Indoor Coated - Electro galvanized
- Load range
- Medium duty
- Description
- Hot-dip galvanized (HDG) hexagon screw corresponding to DIN 933
- Material composition
- Steel grade 8.8
- Surface finish
- Outdoor Coated - HDG
- Load range
- Medium duty
- Description
- Stainless steel (A2) hexagon screw corresponding to DIN 933
- Required material grade
- A2
- Material composition
- Stainless steel A2-70
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel (A4) hexagon screw corresponding to DIN 933
- Required material grade
- A4
- Material composition
- Stainless steel A4-70 - DIN EN ISO 3506-1
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Hot-dip galvanized (HDG) hexagon bolt used in various applications
- Material composition
- Steel grade 8.8
- Surface finish
- Outdoor Coated - HDG
- Base material type
- n/a
- Description
- Hot-dip galvanized (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors
- Material composition
- Steel grade 8.8
- Surface finish
- HDG: 45 µm - DIN EN ISO 10684
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanized hex socket head cap screw corresponding to DIN 912
- Material composition
- Steel grade 8.8
- Surface finish
- Indoor Coated - Electro galvanized
- Description
- DIN 912 hex socket head cap screw (A4 stainless steel)
- Required material grade
- A4
- Material composition
- Stainless steel A4-70 - DIN EN ISO 3506-1
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanized hex head wood screw corresponding to DIN 571
- Material composition
- Steel
- Surface finish
- Galvanized
- Load range
- Light duty
- Description
- Galvanized pipe ring saddle adapter for converting the diameter of threaded rods
- Material composition
- Steel grade 4.6
- Surface finish
- Indoor Coated - Electro galvanized
- Load range
- Light duty
- Description
- Hot-dip galvanized (HDG) pipe ring saddle adapter for converting the diameter of threaded rods
- Material composition
- 11 SMn 30 - DIN EN 10087
- Surface finish
- Outdoor Coated - HDG
- Base material type
- n/a
- Description
- Stainless steel (A4) pipe ring saddle adapter for converting the diameter of threaded rods
- Required material grade
- A4
- Material composition
- Stainless steel, 1.4401 (A4) - EN 10088, AISI 316
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanized roll pipe ring saddle adapter for converting imperial sizes to metric
- Material composition
- Steel 11SMnPb30 – DIN EN 10277-3
- Surface finish
- Indoor Coated - Electro galvanized
- Base material type
- n/a
- Description
- Galvanized reduction sleeves used to reduce the diameter of threaded rods
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanized
- Load range
- Light duty
- Description
- Galvanized pipe hangers for suspension applications of pipes
- Material composition
- Malleable cast iron
- Surface finish
- Indoor Coated - Electro galvanized
- Load range
- Light duty
- Description
- Galvanized eye nut corresponding to DIN 582 with looped heads to receive a hook
- Material composition
- Steel C15E
- Surface finish
- Indoor Coated - Electro galvanized
- Load range
- Light duty
- Description
- Stainless steel (A4) eye nut corresponding to DIN 582 with looped heads to receive a hook
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4-70 - DIN EN ISO 3506-1
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanized air duct bracket for fastening ventilation ducts directly to ceilings
- Approvals
- Acoustic insulation DIN 4109 inspected
- Noise reduction
- 16 dB (A)
- Material composition
- DD11 - DIN EN 10111, EPDM
- Description
- Galvanized air duct bracket for fastening or hanging ventilation ducts
- Approvals
- Acustic insulaton DIN 4109 inspected
- Noise reduction
- 12 dB (A)
- Material composition
- DD11 steel - DIN EN 10111, EPDM
- Description
- Galvanized air duct bracket for fastening light ventilation ducts overhead
- Approvals
- Acoustic insulation DIN 4109 inspected
- Noise reduction
- 18 dB (A)
- Material composition
- DD11 steel - DIN EN 10111, EPDM
- Description
- Galvanized air duct bracket for fastening medium ventilation ducts overhead
- Noise reduction
- 12 dB (A)
- Material composition
- DD11 steel - DIN EN 10111, EPDM
- Surface finish
- Indoor Coated - Electro galvanized
- Description
- Galvanized air duct clamp for use with regular ducts
- Tightening torque
- 5 Nm
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanized
- Description
- Galvanized air duct hangers for fastening round air ducts with sound insulation
- Approvals
- Acoustic insulation DIN 4109 inspected
- Noise reduction
- 18 dB (A)
- Material composition
- DD11 steel - DIN EN 10111, EPDM
- Description
- Galvanized decking hanger for trapezoid sheet with sound insulation
- Approvals
- Acoustic insulation DIN 4109 inspected
- Base material type
- Trapezoid sheet
- Noise reduction
- 18 dB (A)
- Description
- Galvanized decking hanger for trapezoid sheet without sound insulation
- Base material type
- Trapezoid sheet
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanized
- Description
- Galvanized perforated band hanger for fastening ventilation ducts
- Noise reduction
- 18 dB (A)
- For use with
- Perforated band: max. bandwidth 20 mm, max. bandthickness 2.5 mm
- Maximum tensile load - Fz
- 0.6 kN
- Description
- Galvanized silencer for use with compressive loads
- Approvals
- Acustic insulaton DIN 4109 inspected
- For use with
- MQ system
- Material composition
- Connecting part: Chromated galvanized steel, Insulation Material: EPDM
- Description
- Galvanized insulating connector/silencer for use with tensile loads
- Approvals
- Acustic insulaton DIN 4109 inspected
- Noise reduction
- 11 dB (A)
- Material composition
- DD11 - DIN EN 10111, EPDM
- Description
- Sound insulation plate for use with MQ elements
- Base material type
- Modular Support
- Material composition
- EPDM
- Surface finish
- n/a
- Description
- Galvanized silencer for various applications
- Approvals
- Acoustic insulation DIN 4109 inspected
- Noise reduction
- 18 dB (A)
- Material composition
- DD11 - DIN EN 10111, EPDM
- Description
- Serrated washer with increased resistance to gradual loosening
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanized channel plate for trapeze assembly and anchoring
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanized
- Material thickness
- 2 mm
- Description
- Galvanized bored plate for fire-tested trapeze assembly and anchoring
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)