Nails
Browse all single and collated nails for use with battery-, gas- or powder-actuated fastening tools here
11 Products
Filter
- Description
- Collated nails for fastening to concrete and other base materials using the GX 3 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 60 mm
- Minimum thickness of base material (steel)
- 4 mm
- Description
- Collated nails for fastening to concrete and other base materials using the GX 3 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 60 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Collated nails for fastening to steel using the GX 3 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 4 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Collated nails for fastening to concrete and other base materials using the GX 2 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 60 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Collated nails for fastening to concrete and other base materials using the GX 120 gas nailer
- Base materials
- Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 60 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Collated nails for fastening to concrete and other base materials using the GX 120 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 60 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Collated nails for fastening to steel using the GX 120 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 4 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Collated nail (bright) for fastening wood to wood using the GX 90 WF gas nailer
- Base materials
- Wood
- Environmental Conditions
- Dry indoor
- Collation type
- 34 degree paper collated
- Description
- Collated nail (hot-dip galvanised) for fastening wood to wood using the GX 90 WF gas nailer
- Base materials
- Wood
- Corrosion protection
- Hot-dip galvanized
- Environmental Conditions
- Outdoor, rural or urban environment with low pollution, Dry indoor, Indoor environments with temporary condensation, Outdoor temporary applications
- Description
- Collated nail (stainless steel) for fastening wood to wood using the GX 90 WF gas nailer
- Base materials
- Wood
- Corrosion protection
- Stainless steel A2
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor temporary applications, Outdoor, rural or urban environment with low pollution, Outdoor with moderate concentration of pollution
- Description
- Collated nail (bright) for fastening wood to wood using the GX 90 WF gas nailer
- Base materials
- Wood
- Environmental Conditions
- Dry indoor
- Collation type
- 34 degree paper collated